OCM SELUBE chains provide excellent wear life without lubrication as much as 8 to 30 times better than standard roller chain.
SELUBE chain is made up of sintered metal bushings impregnated with high quality oil and plated pins. As SELUBE chain does not require lubrication, it is suitable for applications where lubrication is not possible or practical. All major dimensions are the same as standard roller chain.
SELUBE chain can immediately replace standard ANSI roller chain. The operating temperature should be within a range of -10°C (14°F) to 150°C (300°F). The chain operating speed should be kept below 150m (490feet) per minute.
SEB type SELUBE chain has the same maximum allowable load quidelines as standard roller chain. This chain has shouldered sintered bushings with heavy link plates. As compared with SER type, the bushings of SEB are larger and more oil impregnated. SEB type can last longer than SER without lubrication. This chain can operate on standard sprockets.
SER type SELUBE chain has the same maximum allowable load guidelines as standard roller chain.
This chain has straight bushings with rollers and heavy roller link plates.
SER type chain offers smooth engagement with the sprocket. This chain can operate on standard sprockets.
SELUBE small conveyor chainhas straight sintered bushings impregnated with high
quality oil and strong rollers.
This chain can replace standard conveyor chain and operate on standard sprockets.
The strength of SELUBE small conveyor is lower than that of SER, SEB and standard steel chain.
The selection procedure is the same as that for standard roller chain.
But note the following :
(1) Operating temperature should be within a range of -10°C (14°F) to +150°C (300°F).
(2) Chain should not be exposed to water and deoiling atmosphere.
The speciﬁcations described in this catalogue are subuject to change without notice
OCM SELUBE CHAIN, being self-lubricating, provides excellen wear life, 8 to 30 times better than standard roller chain. ANSI and BS/DIN SELUBE CHAINs are available. SELUBE CHAIN is interchangeable with ANSI and BS/DIN standard roller chain. To prevent corrosion, pins are nickel plated and link plates are blackened.
Operating temperature within a range of -10°C (14°F) to 150°C (302°F)
Operating speed to be kept below 150m (490 feet) per minute
SELUBE CHAIN can be used where lubrication is prohibited or products should not be contaminated.
No lubrication makes environment clean.
Maintenance costs are reduced.
Strength is almost the same as that of standard roller chain.
Heat resistance up to 150°C.