1. Chain Number

2. Material - e.g. Carbon Steel, Stainles Steel (SUS), Nickel Plated (NP), Super Shield (SC) etc...

3. Kind of Attachment / Extended Pin / Outboard Roller etc...

4. Spacing of Attachment / Extended Pin / Outboard Roller etc... - e.g. ON EVERY 2ND LINK, ON EVERY LINK etc...

5. Length or Number of links per length - e.g. 10FT per length, 5 Meters per length,●● links per length etc...

6. Assembling Specification - e.g. incl. Connecting Link (C/L), with Roller Link on each end (RL-RL), Riveted Endless etc...

7. If possible, please send us the photo or drawing of the chain

Select Files

8. Total Quantity

1. Chain Number

2. Sprocket Type - A, B (OCM ORIGINAL), NEW B, BW, C

3. Material - e.g. Carbon Steel, Stainles Steel (SUS), Nickel Plated (NP) etc...

4. Number of Teeth

5. Bore Diameter

6. Key and Set Screw if required

7. If possible, please send us the photo or drawing of the sprocket

Select Files

8. Heat Treatment of Teeth when required on Conveyor Chain (High Frequency induction heating)

9. Total Quantity